Jurnal Pendidikan Fisika Indonesia (Jan 2015)

PEMBUATAN ELEKTRODA KARBON BERPORI DARI TEMPURUNG KEMIRI DAN PERANCANGAN PROTOTIPE SISTEM CAPACITIVE DEIONIZATION (CDI) UNTUK DESALINASI AIR PAYAU

  • A. Astuti,
  • M. Taspika

DOI
https://doi.org/10.15294/jpfi.v11i1.4008
Journal volume & issue
Vol. 11, no. 1
pp. 100 – 107

Abstract

Read online

Telah dilakukan pembuatan karbon aktif dengan bahan dasar tempurung kemiri menggunakan H3PO4 2,5% sebagai aktivator dengan suhu aktivasi (400, 500, dan 600) oC.Luas permukaan aktif yang dihasilkan masing-masing adalah (6,6; 95,6; dan 391,6) m2/g. Karbon yang diaktivasi pada suhu 600 oC digunakan sebagai bahan dasar pembuatan elektroda kapasitor untuk system capacitive deionization (CDI) menggunakan polimer polyvinyl alcohol (PVA) sebaga ipengikat. Berdasarkan data voltammogram siklik terhadap elektroda CDI diperoleh besar kapasitansi spesifik elektroda adalah 50,21 mF/g. Proses desalinasi dilakukan pada larutanNaCl 0,24 M dengan menyusun elektroda menggunakan system monopolar dan diberitegangan DC 1,2 V. Penurunan konduktivitas larutan NaCl menggunakan sistem CDI ini sebesar 61,58%, dengan penurunan kadar natrium dalam larutan NaCl yaitu dari 138,0 mg/L menjadi 80,7 mg/L selama 40 menit. Karbon aktif tempurung kemiri ini sangat potensial untuk dikembangkan sebagai elektroda CDI untuk sistem desalinasi air payau.The writers had done the research of the activated carbon that prepared with the candlenut shell by using H3PO4 2,5% as the activating agent. All samples were heated at the temperatures of (400, 500, and 600) oC. The activated carbon have specific surface area (6.582; 95.623; and 391.567) m2/g respectively. Capacitor electrode for capacitive deionization (CDI) was fabricated by using activated carbon that was heated at activation temperature of 600 oC with polyvinyl alcohol (PVA) as the binder. Based on cyclicvoltammogram of electrode, specific capacitance of CDI electrode is 50.21 mF/g. To observe desalination process of electrode, CDI was made by monopolar system and immersed in NaCl 0.24 M as brackish water sample. Direct current voltage 1.2 V was applied to CDI cell. The decreased of NaCl conductivity with CDI system respectively is 61.58%. Sodium concentration in NaCl decreases from 138.000 mg/L to 80.667 mg/Labout 40 minutes of desalination process.The activated carbon that prepared from candlenut shell is potential to develop as CDI system for desalination of brakish water.

Keywords