IEEE Access (Jan 2021)
Correction to “5.8 GHz 4-Channel Beamforming Tx IC for Microwave Power Transfer”
- Jaekyung Shin,
- Jongseok Bae,
- Hyungmo Koo,
- Sooncheol Bae,
- Jongyun Na,
- Hansik Oh,
- Hyungjin Jeon,
- Hoseok Jung,
- Young Chan Choi,
- Seungmin Woo,
- Chan Mi Song,
- Keum Cheol Hwang,
- Kang-Yoon Lee,
- Youngoo Yang
Affiliations
- Jaekyung Shin
- ORCiD
- Department of Electrical and Computer Engineering, Sungkyunkwan University, Suwon, South Korea
- Jongseok Bae
- ORCiD
- Qualcomm Korea RFFE, Seoul, South Korea
- Hyungmo Koo
- ORCiD
- Department of Electrical and Computer Engineering, Sungkyunkwan University, Suwon, South Korea
- Sooncheol Bae
- ORCiD
- Department of Electrical and Computer Engineering, Sungkyunkwan University, Suwon, South Korea
- Jongyun Na
- ORCiD
- Department of Electrical and Computer Engineering, Sungkyunkwan University, Suwon, South Korea
- Hansik Oh
- ORCiD
- Department of Electrical and Computer Engineering, Sungkyunkwan University, Suwon, South Korea
- Hyungjin Jeon
- ORCiD
- Department of Electrical and Computer Engineering, Sungkyunkwan University, Suwon, South Korea
- Hoseok Jung
- ORCiD
- Department of Electrical and Computer Engineering, Sungkyunkwan University, Suwon, South Korea
- Young Chan Choi
- ORCiD
- Department of Electrical and Computer Engineering, Sungkyunkwan University, Suwon, South Korea
- Seungmin Woo
- ORCiD
- Department of Electrical and Computer Engineering, Sungkyunkwan University, Suwon, South Korea
- Chan Mi Song
- ORCiD
- Department of Electrical and Computer Engineering, Sungkyunkwan University, Suwon, South Korea
- Keum Cheol Hwang
- ORCiD
- Department of Electrical and Computer Engineering, Sungkyunkwan University, Suwon, South Korea
- Kang-Yoon Lee
- ORCiD
- Department of Electrical and Computer Engineering, Sungkyunkwan University, Suwon, South Korea
- Youngoo Yang
- ORCiD
- Department of Electrical and Computer Engineering, Sungkyunkwan University, Suwon, South Korea
- DOI
- https://doi.org/10.1109/ACCESS.2021.3087874
- Journal volume & issue
-
Vol. 9
pp. 83551 – 83551
Abstract
In the above article [1], the received power in dc referred from the reference [2], which is the reference [35] in the original article [1], was incorrectly introduced. It was written as 0.2 W (dc) in the introduction of [1], but the correct received power in the specified condition is 2 W (dc).
