High-temperature tensile failure mechanism of RTM-made composite T-joints

Abstract

This paper focuses on the high-temperature tensile failure mechanism of RTM (resin transfer moulding)-made symmetric and asymmetric composite T-joints. The failure modes as well as the load-displacement curves of symmetric (three specimens) and asymmetric (three specimens) composite T-joints were determined by tensile tests at room and high temperatures. Progressive damage models (PDMs) of symmetric and asymmetric composite T-joints at room and high temperatures were established based on mixed criteria, and the result predicted from the aforementioned PDMs were compared with experimental data. The predicted initial and final failure loads and failure modes are in good agreement with the experimental results. The failure mechanisms of composite T-joints at different temperatures were investigated by scanning electron microscopy. The results reveal that while the failure mode of asymmetric T-joints at high temperatures resembles that at room temperature, there is a difference in the failure modes of symmetric T-joints. The ultimate failure load of symmetric and asymmetric T-joints at elevated temperatures increases and reduces by 18.4% and 4.97%, albeit with a more discrete distribution. This work is expected to provide us with more knowledge about the usability of composite T-joints in elevated temperature environments.

Keywords

• Composite
• Failure mechanism
• T-joint
• High temperature
• Resin transfer moulding