Journal of the European Optical Society-Rapid Publications (Nov 2017)
Solderjet bumping packaging technique optimization for the miniaturization of laser devices
Abstract
Abstract Background Low-stress soldering techniques can guarantee a minimized input of thermal energy allowing for the design and later assembly of more robust and miniaturized optical devices. However, in order to build miniaturized optical devices, these small-induced stresses produced by soldering techniques have to be investigated to guarantee that the stress-induced birefringence effects do not alter the device optical properties and requirements. Methods An analytical method that relates the stress-induced birefringence of laser components with their corresponding lasing capabilities has been compared to the real induced-stress results created in components packaged using solderjet technology. The main goal was to optimize the optical component packaging by using this low induced-stress soldering technique. The optimization was carried out by assessing components miniaturization while still assuring high robustness of the bond strength without creating a beam depolarization ratio of more than 1%. Results The outcome of the study showed the possibility of assembling laser optical components down to sizes of around 300 μm, creating a bond strength of 5 N and higher, and a depolarization ratio much lower than the proposed target of 1%. Conclusions Our results in terms of induced stress agreed with the finite element method result, which would imply correct post-processing laser simulations. This suggested that the solderjet bumping technique could robustly join components down to the laser emission beam size without strongly affecting the optical properties.
Keywords