Investigation of adsorption of the dyestuff astrazon red violet 3rn (basic violet 16) on montmorillonite clay

Brazilian Journal of Chemical Engineering. 2014;31(1):171-182 DOI 10.1590/S0104-66322014000100016


Journal Homepage

Journal Title: Brazilian Journal of Chemical Engineering

ISSN: 0104-6632 (Print); 1678-4383 (Online)

Publisher: Brazilian Society of Chemical Engineering

LCC Subject Category: Technology: Chemical technology: Chemical engineering

Country of publisher: Brazil

Language of fulltext: English

Full-text formats available: PDF, HTML, XML



B. A. Fil (Ataturk University)
M. T. Yilmaz (Ataturk University)
S. Bayar (Ataturk University)
M. T. Elkoca (Ataturk University)


Peer review

Editorial Board

Instructions for authors

Time From Submission to Publication: 12 weeks


Abstract | Full Text

In this study, color removal by absorption from synthetically prepared wastewater was investigated using montmorillonite clay by adsorption. As dyestuff Astrazon Red Violet 3RN (Basic Violet 16) was used. Experimental parameters selected were pH, temperature, agitation speed, initial dyestuff concentration, adsorbent dosage and ionic strength. It was established that adsorption rate increased with increasing pH, temperature, dye concentration and agitation speed, but decreased with increased ionic strength and adsorbent dosage. Adsorption equilibrium data obtained by a series of experiments carried out in a water bath were employed with common isotherm equations such as Langmuir, Freundlich, Temkin, Elovich and Dubinin-Radushkevich. It was found that the Langmuir equation appears to fit the equilibrium data better than the other models. Furthermore, the fit of the kinetic data to common kinetic models such as the pseudo-first-order, second-order, Elovich and intraparticle diffusion models was tested to elucidate the adsorption mechanism. Kinetic data conformed to the pseudo-second-order model, indicating chemisorptions. In addition, the thermodynamic parameters activation energy, Ea, enthalpy ΔH*, entropy, ΔS*, and free energy change, ΔG*, were calculated. The values of the calculated parameters indicated that physical adsorption of ARV on the clay was dominant and that the adsorption process was endothermic.