Melt flow-induced mechanical deformation of dendrites in alloy solidification: A coupled thermal fluid - solid mechanics approach

Abstract

Melt flow during alloy solidification promotes more dendrite fragments or equiaxed grains due to dendrite fragmentation, while the complex interactions between melt flow and dendritic growth causing flow-induced dendrite deformation and dendrite fragmentations remain obscure. In this work, cellular automaton-finite volume approach and the displacement-based finite element method have been combined to simulate dendrite growth, fluid flow and flow-induced mechanical deformation in Al-4.5 wt%Cu alloy, and to reveal the stress evolution during dendritic growth under melt convection. It is found that dendrites can undergo visible mechanical bending under fluid flow. The stress increases with the enhancement of fluid flow. The primary dendritic trunk is the location of the dominant deformation under a parallel fluid flow. Though the secondary dendrite does not suffer the large stress, it significantly affects the stress concentration of the primary dendritic trunk. As flow velocity increases, the secondary dendrite arm spacing gradually decreases and bridging occurs due to the contact of tertiary dendrites. The bridging of secondary dendrites impedes the development of stress concentrations. Especially, as inflow velocity exceeds 0.05 m/s, the stress does not get larger than that under the velocity of 0.01 m/s under the complication interactions between the dendritic growth and flow patterns. Unlike previous understanding, the maximum stresses induced by melt flow are mainly located at the position where primary dendritic trunk intersects with unconnected secondary dendrites or the thin dendrite trunk.

Keywords

• Dendritic deformation
• Dendrite fragmentation
• Fluid-dendritic structure interaction
• Microstructure