Three dimensional discrete element modelling of the conventional compression behavior of gas hydrate bearing coal

Abstract

Abstract To analyze the relationship between macro and meso parameters of the gas hydrate bearing coal (GHBC) and to calibrate the meso-parameters, the numerical tests were conducted to simulate the laboratory triaxial compression tests by PFC3D, with the parallel bond model employed as the particle contact constitutive model. First, twenty simulation tests were conducted to quantify the relationship between the macro–meso parameters. Then, nine orthogonal simulation tests were performed using four meso-mechanical parameters in a three-level to evaluate the sensitivity of the meso-mechanical parameters. Furthermore, the calibration method of the meso-parameters were then proposed. Finally, the contact force chain, the contact force and the contact number were examined to investigate the saturation effect on the meso-mechanical behavior of GHBC. The results show that: (1) The elastic modulus linearly increases with the bonding stiffness ratio and the friction coefficient while exponentially increasing with the normal bonding strength and the bonding radius coefficient. The failure strength increases exponentially with the increase of the friction coefficient, the normal bonding strength and the bonding radius coefficient, and remains constant with the increase of bond stiffness ratio; (2) The friction coefficient and the bond radius coefficient are most sensitive to the elastic modulus and the failure strength; (3) The number of the force chains, the contact force, and the bond strength between particles will increase with the increase of the hydrate saturation, which leads to the larger failure strength.

Keywords

• Gas hydrate bearing coal
• Discrete element method
• Triaxial compression test
• Macro–meso mechanical properties
• Saturation
• Linear parallel bond model