Effect of composition and pouring temperature of Cu(20-24)wt.%Sn by sand casting on fluidity and mechanical properties

Abstract

The effect of tin composition and pouring temperature on the length of fluidity, microstructure, density, hardness, tensile strength and bending of Cu-Sn alloy with sand casting method has been investigated. Cu(20-24)wt.%Sn were casted in two different pouring temperatures (1000 ºC and 1100 ºC) in strip plate pattern sand mold. The sand mold has a length of 400 mm, width of 10 mm with a thickness of the mold cavity varied from 1.5 to 5 mm. The results show that the increase in composition (20-22) wt.% Sn decreases the length of fluidity while the composition (22-24) wt.% Sn length fluidity increase again. Increase of the pouring temperature and mold cavity thickness can increase the length of fluidity. Increasing tin composition and pouring temperature can increase the phase of α structure, porosity, hardness of the alloy and trigger the growth of dendrite columnar and secondary dendrite (DAS) microstructure.While the density, tensile strength and bending strength of the alloy tend to decrease. Increasing tin composition and pouring temperature in Cu(20-24) wt.% Sn caused the alloy to be more brittle.

Keywords

• cu-sn
• sand casting
• fluidity
• tin composition
• pouring temperature