Study of Mechanical and Surface Properties of Multi-Walled Carbon Nanotube Grafted Flax Fiber and Its Composites

Abstract

ABSTRACTThe modification method of grafting multi-walled carbon nanotubes (MWCNT, abbreviated as CNT in this paper) on the surface of flax fibers was investigated, i.e. CNT were grafted onto the surface of flax fibers by silane coupling agent under the action of ultrasonic waves to form covalent bonding. The tensile strength of CNT grafted flax fiber is 22% higher than that of untreated flax fiber monofilament. The tensile strength of FFRP composites after CNT grafting treatment increased by 14.2%; however, the tensile modulus of single fiber and composites did not show a significant increase, the interfacial shear strength of the fiber-resin is 38.3% higher than that of untreated filament. The improvement of the contact angle after grafting was investigated by observing the surface morphology, and the surface of flax filament was characterized by scanning electron microscopy and atomic force microscopy. Also the elemental changes of the flax single fiber surface before and after the treatment were analyzed using X-ray photoelectron spectroscopy. The results showed that the tensile strength of flax single fibers, its composites, and interfacial shear strength of fiber-matrix was improved after CNT grafting treatment but the increase of modulus was not obvious.

Keywords

• Flax fiber
• grafting
• MWCNT
• surface modification
• single fiber
• interfacial properties