Influence of contact characteristics of joint surface on vibration performance of the giant magnetostrictive transducer

Abstract

The giant magnetostrictive transducer is a transducer device that realizes magneto-mechanical energy conversion. Each mechanical component is connected by the joint surface to realize the transmission of ultrasonic vibration energy. To ensure the efficient transmission of energy, the influence of the contact characteristics of the joint surface on the output stability of the transducer is studied. According to the contact conditions between the mechanical joint surfaces of the giant magnetostrictive ultrasonic transducer (GMUT), the key factors affecting the mechanical vibration performance of the ultrasonic system are obtained by analyzing the vibration transmission characteristics of the joint surfaces. The influence of different joint surface contact characteristics (JSCT) on the amplitude–frequency curve of the transducer is analyzed by the ANSYS software. Simulations and experiments have been conducted to verify the predicted results. As the preload force increases, the natural frequency of the transducer increases, but the growth rate decreases. The natural frequency of the double-rod GMUT with a small joint surface area is slightly higher in the optimal output mode shape, while its amplitude is significantly larger. The optimal prestress for the GMUT with different-sized joint surfaces is 3–5 MPa. This paper acquires the JSCT under a high-frequency vibration condition, reveals the influence of the joint surface on the mechanical output performance of the GMUT, and can provide a theoretical basis for the design and analysis of the rotary ultrasonic vibration processing system.