Effect of imposed strain and annealing temperature on uniform elongation in A5052 alloy processed by accumulative roll bonding

Abstract

The relation between strain and uniform elongation, and the effect of low-temperature annealing, were examined using an Al-Mg alloy (A5052) processed by accumulative roll bonding (ARB). Specimens were deformed by ARB for 1 to 7 cycles at room temperature, and then subjected to isochronal annealing for 30 min at temperatures ranging from 100 to 300 °C. Tensile properties, hardness, and grain boundary structure before and after annealing were investigated. The uniform elongation of ARB-processed specimens decreases with increasing ARB cycles. However, the elongation is improved by low-temperature annealing for specimens processed by ARB of 3 or more cycles. Higher strain in the ARB process results in higher uniform elongation after annealing, even though the specimens have the same value of 0.2% proof stress. This improvement of the uniform elongation by annealing is caused by annihilation of dislocations inside ultra-fine grains, which are developed by ARB of 3 or more cycles.

Keywords

• aluminum-magnesium alloy
• severe plastic deformation
• mechanical property
• low temperature annealing
• ultrafine grains