Water Science and Technology (Dec 2022)
The eco-friendly treatment of rubber industry effluent by using adsorbent derived from Moringa oleifera bark and Pseudomonas sp, cultured from effluent
Abstract
Rubber processing generates a large volume of wastewater containing rubber latex residues and chemicals. Remediation of the wastewater needs a cost-effective and environment-friendly treatment method. For this study, Moringa oleifera stem bark and Pseudomonas sp. bacteria were used for adsorption and microbial treatment of the effluent. The adsorbent surface was mostly amorphous with crystallinity index 37.9% and the BET surface area was 6.622 m2/g. FTIR analysis indicated involvement of O-H stretching, ketone α, β-unsaturated, C-H stretching, carboxylic acid and derivatives O-C stretching functional groups in the adsorption process. The assessment of the above two agents was based on their reduction capabilities of the toxic parameters, such as total suspended and dissolved solids, total solids, biological and chemical oxygen demand, sulphate, ammonium, dissolved oxygen, phosphate, pH, electrical conductivity, turbidity, and oxidation reduction potential from the wastewater. A comparative study of the present work revealed that both the agents were effective in reduction of most of the above parameters below the safe discharge limits. However, the adsorption using Moringa oleifera stem bark was better compared to the biodegradation by Pseudomonas sp. bacteria. The main challenges that typically accompany biodegradation include microbe handling and a lower removal percentage than adsorption. HIGHLIGHTS Adsorption and biogradation method were used separately to treat the rubber latex industry effluent.; The pollutant removal efficacy of Moringa olifera bark and Pseudomonas sp were extensively studied.; Overall performance of Moringa olifera bark was found to be better than Pseudomonas sp.; BOD, COD, TSS, TDS, TS, phosphate, sulphate, DO were the most influencing physico-chemical parameters.;
Keywords
