Energies (Jul 2022)

Classification and Evaluation of Shale Oil Reservoirs of the Chang 7<sub>1-2</sub> Sub-Member in the Longdong Area

  • Heting Gao,
  • Xinping Zhou,
  • Zhigang Wen,
  • Wen Guo,
  • Weichao Tian,
  • Shixiang Li,
  • Yunpeng Fan,
  • Yushu Luo

DOI
https://doi.org/10.3390/en15155364
Journal volume & issue
Vol. 15, no. 15
p. 5364

Abstract

Read online

Establishing a suitable classification and evaluation scheme is crucial for sweet spot prediction and efficient development of shale oil in the Chang 71-2 sub-member of the Longdong area. In this paper, a series of experiments, such as casting thin sections (CTS), scanning electron microscopy (SEM), low-temperature nitrogen adsorption (LTNA), high-pressure mercury intrusion porosimetry (HMIP), and nuclear magnetic resonance (NMR), were integrated to classify the pore throats and shale oil reservoirs in the study area. Moreover, the pore structure characteristics of different types of reservoirs and their contributions to productivity were revealed. The results show that the pore-throat system can be divided into four parts: large pore throats (>0.2 μm), medium pore throats (0.08~0.2 μm), small pore throats (0.03~0.08 μm), and micropore throats ( 0.1 mD), type II (Φ ≥ 8%, 0.05 mD < K < 0.1 mD), type III (Φ ≥ 5%, 0.02 mD < K < 0.05 mD) and type IV (Φ < 5% or K < 0.02 mD). From type I to IV reservoirs, the proportion of dissolved pores and intergranular pores gradually decreases, and the proportion of intercrystalline pores increases. The proportion of large pore throats gradually decreases, and the proportions of medium pore throats and small pore throats increase initially and then decrease, while the proportion of micropore throats increases successively. The NMR pore size distribution changes from the right peak to the left peak. The developed section of the type I reservoir corresponds to the oil layer, and the developed section of the type I and II reservoirs corresponds to the poor oil layer. In contrast, the developed section of the type III and IV reservoirs corresponds to the dry layer. The daily production from single wells is primarily attributable to type I and II reservoirs.

Keywords