Microstructure evolution and strengthening mechanism of A356/Al-X-Ce(Ti, C) system by inoculation treatment

Abstract

In recent decades, grain refiners had not only improved the properties on cast aluminum alloy, but also changed the application field of cast aluminum alloys, which had attracted widespread attention. However, there were few reports on microstructure evolution of A356/CRE Al-X-Ce(Ti, C) system by combining traditional grain refiners with element Ce. In this study, refined A356 alloys with excellent strength and plasticity were obtained by adding CRE Al-X-Ce(Ti, C) (0, 0.4, 0.8, 1.2, 1.6 and 2.0 wt%, respectively). Using XRD, SEM and TEM, the morphology of phases in the refined A356 alloy and phases of grain refiner were identified. The microstructure evolution of α-Al grains and eutectic Si with the introduction of TiC and Ce was analyzed. The results showed that the novel CRE Al-X-Ce(Ti, C) could not only effectively refine α-Al grains, but also modify Si microstructure of the alloy. The refined A356 alloys with excellent strength and plasticity were obtained with 2.0 and 1.6 wt% grain refiner (CRE) additions, respectively. TiC as nucleation particle and Ce as the surfactant refined the α-Al grains. Also, Ce modified eutectic Si by changing the way it grows. When the CRE Al-X-Ce(Ti, C) content researched 2.0 wt%, the long plate-like Al–Si–Ce phase was formed which can easily caused cracks and reduced the elongation of alloy.

Keywords

• CRE Al-X-Ce(Ti, C)
• Grain refinement
• A356 alloy
• Eutectic Si modification
• Mechanical property