Frontiers in Materials (Dec 2022)

Analytical modeling of cross-ply cylindrical composite submersible shell with elastic buckling using first order shear deformation theory

  • Hafiz Muhammad Waqas,
  • Dongyan Shi,
  • Sohaib Z. Khan,
  • Mahmoud Helal,
  • Mahmoud Helal,
  • Elsayed Fathallah,
  • Elsayed Fathallah

DOI
https://doi.org/10.3389/fmats.2022.1004752
Journal volume & issue
Vol. 9

Abstract

Read online

The main objective of this study is to design composite shells i.e. long, short, thin and thick for the different underwater applications. These shells can be a part of pressure hulls, underwater vehicles, pressurized tanks, underwater cables and underwater pipelines etc. This paper presents comprehensive procedures for the mathematical modeling of elastic buckling for submersible composite shells under hydrostatic pressure. First order shear deformation theory (FOSDT) was used for modeling. FOSDT theory was mathematically derived under hydrostatic pressure for composite shells, and it can be used for all types of submersible shells. After the derivation of the theory, mathematical code was formed on MATLAB for this modeling. From the given formulation one can design the shell structure according to his needs on different environment conditions. Different types of composite shells, including moderately thick, thick, long, and short, are investigated for the FOSDT formulation to check the accuracy range. The results were compared with previous studies and finite element analysis FEA. Three types of materials, Carbon/Epoxy, Glass/Epoxy, and Boron/Epoxy, were used with different cross-ply symmetric and unsymmetrical angle configurations. The layups used for the analysis were [0/90/0]s [90/0/90/0]s [02/902]s [90/02/90]s [0/902/0]s [0/0/0/90]s [90/90/90/0]s and [0/90].

Keywords