Case Studies in Construction Materials (Jul 2024)
Investigation on the potential of Eulaliopsis binata (babiyo) as a sustainable fiber reinforcement for mortar and concrete
Abstract
The production of synthetic materials emits harmful gases, driving researchers to seek eco-friendly alternatives, leading to increased demand for natural fiber-based composites in various industries. With advantages like cost-effectiveness, renewability, and biodegradability, natural fiber reinforced composites gain popularity in concrete applications. Their use in concrete has gained global acceptance for its smaller carbon footprint, reduced energy consumption, and minimized wastage. This research aims to evaluate the suitability of Eulaliopsis binata (EB) fiber in mortar and concrete applications. Mortar samples were prepared using different proportions of alkaline-treated EB fibers (0%, 0.25%, 0.5%, 0.75%, 1% and 1.25% by total weight of mortar) in a cement-sand-water mixture with a 1:1:0.35 ratio. Additionally, concrete with a mix proportion of 1:2.15:3.13 (cement: fine aggregate: coarse aggregate) and a water-cement ratio of 0.618 was prepared. The flexural strength test was conducted using plain concrete as well as concrete with untreated and epoxy-treated EB fiber bars of varying diameters. The results revealed that EB fiber-reinforced mortar exhibited a notable increase in flexural and splitting tensile strength, with a 10.85% and 6.23% improvement compared to plain mortar at 0.75% EB fiber content, while compressive strength decreased. Similarly, concrete reinforced with untreated and epoxy-coated EB fiber bars of 14 mm diameter demonstrated 12.32% and 13.27% higher flexural strength, respectively, than that of unreinforced concrete. These results highlight the potential for affordable green concrete production, supporting sustainable infrastructure development. The EB fiber usage presents an encouraging pathway for environmentally conscious construction practices with reduced environmental impact.