Advances in Materials Science and Engineering (Jan 2017)

Effects of Particle Size and Cement Replacement of LCD Glass Powder in Concrete

  • Seong Kyum Kim,
  • Su Tae Kang,
  • Jin Kwang Kim,
  • Il Young Jang

DOI
https://doi.org/10.1155/2017/3928047
Journal volume & issue
Vol. 2017

Abstract

Read online

The high quality liquid crystal display (LCD) processing waste glass (LPWG) generated from the manufacturing process of Korea’s LCD industries, having the world’s highest technological level and production, was finely ground into particles smaller than cement particles (higher fineness than OPC) to verify their applicability and performance as a replacement for cement. For a concrete mix having a W/B ratio of 0.44, cement was replaced with LPWG glass powder (LGP) at ratios of 5, 10, 15, and 20% (LGP12) and 5 and 10% (LGP5) according to the particle size to prepare test cylinder specimens, which were tested with respect to air contents, slump in fresh concrete, and compressive strength and splitting tensile strength of hardened concrete. The microstructure of the concrete specimens was analyzed through Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDX), and a Mercury Intrusion Porosimetry (MIP). Replacement of cement with LGP for cement could effectively decrease the quantity of cement used due to the excellent performance of LGP. It may positively contribute to the sustainable development of the cement industry as well as waste recycling and environment conservation on a national scale.