Practical Automatic Planning for MV Distribution Network Considering Complementation of Load Characteristic and Power Supply Unit Partitioning

Abstract

A new practical automatic planning method for MV distribution network considering complementation of load characteristic and division of power supply is presented to solve the problems of large network size and low equipment utilization ratio caused by the lack of consideration of complementation of load characteristic in distribution network planning. First, based on the existing research results on load clustering and grid planning, the concepts of MV distribution network feeder block and power supply unit are redefined and the technical framework of MV distribution network planning considering division of power supply is designed. Then, the evaluation indexes of feeder block partitioning and power supply unit partitioning considering complementation of load characteristic are set up, and rotation center line distance weighting alternate location algorithm is proposed to divide the feeder block. Further, the MV distribution network planning model based on power supply unit partitioning is proposed, which takes the minimum value of the sum of interruption cost based on reliability index and line integrated cost of the planning year. Combining ant colony algorithm, automatic planning algorithm is proposed to get the combinatorial solution of trunk line and branch line. Finally, the scientificalness and practicability of the model and method in this paper was verified through the case study.

Keywords

• Load characteristics
• block partition
• power supply unit
• automatic planning