Alternative Models for Calculation of Static Overturning Angle and Lateral Stability Analysis of Subcompact and Universal Tractors

Abstract

Vehicle lateral stability is evaluated using the static overturning angle. The correct value of this parameter depends on the calculation method. The aim of this study was to compare the latest standard with previously published methodology, to propose two alternative methodologies (Models 1 and 2) and to analyze the influence of various levels of rear wheel ballast weights and overall tire widths on the stability of universal and subcompact tractors. The results showed a significant regression effect of the rear wheel ballast weight on static overturning angle. The influence of the rear wheel ballast weight was higher in the subcompact tractor than in the universal tractor due to a larger distance between the height of the center of gravity and the center of the rear axle. Comparing the latest standard with the previously published methodology, the highest difference values were 13.82% and 7.30%. Both models are based on the previously published methodology and differ from each other in rolling and slope lines. The methodology proposed in Model 2 differed from the standard similarly to the previously published methodology; therefore, it is irrelevant. Model 1 reached differences of only −1.81% and −1.63%, representing a minimal difference from the standard.

Keywords

• center of gravity
• rear wheel ballast weight
• overall width on tires
• tractor dimensions
• tire width