Enhancing the dielectric and thermal properties of polytetrafluoroethylene-based composites through designing and constructing a novel interfacial structure

Abstract

Polytetrafluoroethylene (PTFE) is widely used as a fundamental core material for high-frequency and high-speed signal transmission fields due to its excellent dielectric properties. However, the high coefficient of thermal expansion (CTE) characteristic of PTFE severely limits its practical application. The CTE of PTFE can be reduced by filling with SiO2, which is always accompanied by a rapid deterioration of dielectric properties due to the poor interfacial compatibility between SiO2 and PTFE matrix. In this paper, the challenge of synergistic regulation of dielectric and CTE properties for PTFE-based composites is overcome by constructing an interfacial structure with physical interactions. Micro-mesoporous SiO2 (mSiO2) is prepared and introduced as a filler, compared with smooth surface SiO2 (sSiO2), the presence of micro-mesoporous in mSiO2 allows PTFE molecular chains to be adsorbed on the surface or in the pore channels of mSiO2, which improves the interfacial combination of the mSiO2/PTFE composites through the physical interaction between mSiO2 and PTFE. The results show that mSiO2/PTFE composite exhibits a lower CTE (58 ppm °C−1) while maintaining a lower dielectric constant (εr, 2.29, 30 GHz) with dielectric loss (tan δ, 2.31 × 10−3, 30 GHz) at a filler addition of 30 vol%, as compared with that of the sSiO2/PTFE composites. This work provides a new strategy for fabricating PTFE-based composites with low CTE as well as low εr and tan δ.

Keywords

• PTFE-Based composites
• Physical interaction
• Interfacial structure
• Micro-mesoporous SiO2