MDAO and Aeroelastic Analyses of Small Solar-Powered UAVs with Box-Wing and Tandem-Wing Architectures

Abstract

The market of solar-powered Unmanned Aerial Vehicles (UAVs) for defence purposes and drone services is expected to grow by a factor of more than 2 in the next decade. From an aircraft design perspective, the main challenge is the scalability of the proposed architectures, which is needed to increase the payload capabilities. Beside some successful examples of wing-tail UAVs, some newcomers are developing prototypes with tandem-wing architectures, hence enlarging the possible design. The present paper aims to introduce a further step in this direction, taking also the box-wing architecture into account to show how the presence of wing tip joiners can provide benefits from the aeroelastic point of view. UAVs with take-off mass within 25 kg are considered and the main tools adopted are presented. These are an in-house developed Multi-Disciplinary Analysis and Optimization (MDAO) code called SD2020 and the open source aeroelastic code ASWING, both presented together with an assessment of their accuracy by means of higher fidelity numerical results. SD2020 results are presented for the case of small box-wing solar UAVs optimized to achieve the longest endurance, focusing on the strategy implemented to achieve feasible solutions under an assigned set of constraints. Further results are presented for comparable box-wing and tandem-wing UAVs from both the aerodynamic and aeroelastic standpoints. Whereas the aerodynamic advantages introduced by the box-wing are marginal, significant advantages result from the aeroelastic analyses which indicate that, if the joiners are removed from the box-wing configuration, safety margin from flutter speed is halved and the bending-torsion divergence occurs at relatively low speed values.

Keywords

• solar powered
• UAV
• HAPS
• MDAO
• box-wing
• tandem-wing