Deformation Mechanisms of Isotactic Poly-1-Butene and Its Copolymers Deformed by Plane-Strain Compression and Tension

Abstract

The deformation-induced crystalline texture of isotactic poly-1-butene and its random copolymers with ethylene, developing during plane-strain compression and uniaxial tension, was investigated with X-Ray pole figures, supported by small-angle scattering (SAXS) and thermal analysis (DSC). The crystallographic (100)[001] chain slip was identified as the primary deformation mechanism, active in both compression and tension, supported by the transverse slip system and interlamellar shear. At the true strain around 0.8, lamellae fragmentation and partial destruction of the crystalline phase due to slip localization was observed, much heavier in tension than in plane-strain compression. That fragmentation brought an acceleration of the slip, which ultimately led to a common fiber texture in tensile samples, with the chain direction oriented preferentially along the drawing (flow) direction. Slightly more complicated crystal texture, reflecting triaxiality of the stress field, still with the chain direction preferentially oriented near the flow direction, was observed in compression. Additional deformation mechanism was observed at low strain in the plane-strain compression, which was either interlamellar shear operating in amorphous layers and supported by crystallographic slips or the simultaneous (110)[110] transverse slip operating on a pair of (110) planes. It was concluded that deformation proceeded similarly in both studied deformation modes, with practically the same deformation mechanisms engaged. Then, the plane-strain compression, proceeding homogeneously and preventing cavitation, seems more suitable for studies of the real deformation behavior, not obscured by any unwanted side-effects.

Keywords

• isotactic poly-1-butene (iPB-1)
• deformation
• texture
• deformation mechanism
• tension
• compression