Influence of external insert angle on structural deformation of long pipe shed with shallow hole

Abstract

Abstract The long pipe shed advanced support has the characteristics of large construction difficulty, wide support range, and easy deviation. The difference in construction dip angle will produce a different plastic zone of surrounding rock and supporting effects, and the rationality of advanced support design plays an important role in the safety of tunnel opening excavation. Based on the Tianshan Tunnel project, this paper aims at the problems of the loose pebble layer structure, poor cohesion, strong permeability, shallow excavation is not easy to form a confined arch, and easy to causes surrounding rock deformation and failure. Combined with the new method theory, the finite difference software FLAC3D was used to simulate seven excavation schemes of the shallow tunnel entrances. The mechanism and effect of advance support and the influence of construction angle on support effect are analyzed, and the simulation values are compared with the measured data. The results show that using long pipe shed advanced support can effectively reduce the disturbance of excavation to lose pebble rock mass and reduce the convergence value of surrounding rock. The plastic zone of surrounding rock produced by different angles can be divided into three parts. The structural stability difference of the C1 zone is small, and that of the C3 zone is large. The bending moment, shear force, and shape variables of the pipe shed decrease with the increase of the dip angle, while the axial force increases with the increase of the dip angle. According to the similarity between the simulated curve and the measured curve, the best supporting effect can be achieved when the dip angle of the pre-supporting pipe shed is set in the range of 0° ~ 3°.