Investigation on the interface bonding and reinforcement mechanism of nano Ti/AZ31 magnesium matrix composites

Abstract

In this study, nano Ti/AZ31 composites were successfully prepared by powder metallurgy method, and the strength and plasticity of the composites were improved in both directions. The SEM shows that the Ti particles were evenly distributed at the grain boundary in the sintered composite, and the Ti particles pin the grain boundary to make the grain of the composite significantly refined. EBSD shows that the addition of nano Ti particles significantly reduces the texture strength of the composite and increases the starting probability of the slip system. TEM shows that nano Ti and AZ31 matrix formed stable Al3Ti and MgO phases at the interface, and shows a strong coherent relationship. The nanoindentation test shows that the Ti/AZ31 interface of the composite was stable, the interface bonding energy and interface fracture toughness were gradiently distributed, and the bonding energy and fracture toughness of the interface bonding area were better than those of the matrix. Tensile test shows that the 1.5 wt%Ti/AZ31 composite obtained the best comprehensive mechanical properties with yield strength, ultimate tensile strength and elongation of 143 MPa, 243 MPa and 11.5%, respectively, obviously higher than those of AZ31 alloys. The increased strength was mainly due to the grain refinement and strengthening at grain boundaries. The improved ductility was the result of weakened texture, increase of slip system start-up probability and strong interfacial bonding between Ti particles and AZ31 matrix.

Keywords

• Mg matrix composites
• Nano ti
• Interface bonding
• Reinforcement mechanism