An influence of technological contraflexure of crane bridges on its durability

Abstract

Standard requirements till 1996 year during bridge crane manufacturing demanded a positive technological contraflexure. As a result of this process were implemented technological compressive stress into tensile zone from inertial and operational loads and tensile stress into compressive zone. This way there were redistributed resultant stress which have increased fatigue strength of exploited crane bridges. Actually valid standard PN-ISO 7363 has removed this obligatory requirement. Its use depends of crane buyer demands. Reduction of initial positive deflection can be seen after few years of crane operations. It is a case of girders permanent deflections increment. Article presents method of technological prestressing of bridge girders with its practical application to obtain positive contrafexure.

Keywords

• Repair of cranes
• technological compression
• regeneration of deflections