Active-passive radial-additive friction stir repairing of mechanical hole out of dimension tolerance of AZ31 magnesium alloy

Abstract

In order to avoid the depth increasing of repaired hole and eliminate the super-fine grain band in stir zone by radial-additive friction stir repairing (R-AFSR), a solid-state repairing technique of active-passive radial-additive friction stir repairing (AP-RAFSR) assisted by the truncated cone-shaped filling material was proposed in this study. The mechanical hole out of dimension tolerance of AZ31 magnesium alloy was chosen as the repaired object. The results indicated that the AP-RAFSR process rather than the R-AFSR process avoided the kissing bond in the bottom of the repairing interface under the condition of the tool pin length equal to the height of the standard mechanical hole. The continuously-distributed and large-length super-fine grain bands were eliminated in the stir zone by AP-RAFSR. The maximum tensile and compressive-shear strengths of repaired hole by AP-RAFSR reached 190.6 MPa and 138.9 MPa at 1200 rpm respectively, which were equivalent to 97.7% and 89.6% of those of the standard mechanical hole. This AP-RAFSR process assisted by the truncated cone-shaped filling material provides a new technique to obtain a no-depth-increasing, defect-free and high-strength repaired mechanical hole.

Keywords

• Active-passive radial-additive friction stir repairing
• Mechanical hole out of dimension tolerance
• Numerical simulation
• Microstructure
• Mechanical properties