Analysing Airflow Velocity in the Canopy to Improve Droplet Deposition for Air-Assisted Spraying: A Case Study on Pears

Abstract

The suitability of airflow velocity in airborne spraying operations in orchards is mostly evaluated on the basis of inlet and outlet based on the airflow velocity at the canopy. However, the airflow velocity required to penetrate into the inner layer of the canopy, which is prone to pests and diseases, is still unclear due to variation in the geometry of the plant canopies. In this study, pear trees were selected as an example to explore the variations in the law of airflow attenuation in the inner canopy. Furthermore, we examine mist droplet formation in the inner canopy to determine a suitable inner canopy airflow end velocity (ICAEV) for air-assisted application. We also conducted a field validation test. The results showed that the majority of airflow velocity loss occurred in the middle and outer part of the canopy; rapid decline of airflow occurred in the 0–0.3 m section, whereas the slow decline of airflow occurred in the 0.3–0.8 m section. When the ICAEV is in the range of 2.70–3.18 m/s, the spraying effect is better. The droplet deposition variation coefficient was 42.25% compared with 51.25% in the conventional airflow delivery mode. Additionally, the droplet drift was reduced by 12.59 μg/cm2. The results of this study can identify a suitable ICAEV for air-assisted spraying in orchards.

Keywords

• air-assisted spraying
• canopy
• wind demand criteria
• spraying effectiveness