Triple‐indexed passive islanding detection strategy for grid‐connected distributed generation networks using an extended Kalman filter

Abstract

Abstract Islanding detection is a challenging issue in modern grid‐connected distributed generation networks (GCDGN). Generally, islanding detection has two categories local and remote, local schemes can be categorized into active, passive, and hybrid schemes. This article proposes a triple‐indexed passive islanding detection (TIPID) scheme using an extended Kalman filter (EKF). Initially, the EKF algorithm is applied on voltage signal at the point of the common coupling to estimate the desired fundamental and non‐fundamental features. The first index, known as the cumulative voltage logarithmic index, is computed by taking the natural logarithm of the fundamental voltage features to detect any variations in the GCDGN. The second index, known as the voltage differentiation index (VDI), is calculated from the fundamental voltage features, while the third index, known as the odd‐order harmonic distortion index (OOHDI), is obtained from the non‐fundamental odd‐order harmonics of the PCC voltage. Then, the VDI and OOHDI are compared to pre‐defined threshold to detect/distinguish islanding events. The proposed TIPID method is validated through extensive simulations on the IEEE 13‐bus test bed via MATLAB/Simulink 2022b. Results show that under both balanced/unbalanced load & generation, the proposed TIPID approach detects islanding occurrences with reduced non‐detection zone (NDZ) in less than 5 ms.

Keywords

• distributed power generation
• Kalman filters
• power distribution protection