Multi-Objective Optimization for the Forming Quality of a CeO₂/Al6061 Alloy as an Aluminum–Air Battery Anode Manufactured via Selective Laser Melting

Abstract

To improve the discharge performance of aluminum–air batteries, CeO2/Al6061 composites were prepared as an anode using selective laser melting (SLM). Response surface methodology (RSM) was employed, and the test results were linearly fitted. A prediction model for the forming quality of the composite anode was established, and the reliability of the model and the interaction between process parameters were explored based on variance analysis and significance testing. On this basis, with corrosion potential, self-corrosion rate, and discharge voltage as optimization objectives, the optimal solution set of the SLM forming CeO2/Al6061 anode process parameter was solved through a genetic algorithm, and experimental verification was conducted. The results indicate that the optimal process range for the forming quality and various properties of composite materials is laser power of 265~285 W, scanning speed of 985~1025 mm/s, and scanning spacing of 0.116~0.140 mm. The optimized process parameters were selected for reliability testing, and the errors were all within 3.0%, verifying the accuracy and reliability of the model.

Keywords

• CeO₂/Al6061 anode
• aluminum–air battery
• multi-objective optimization
• forming quality
• SLM