Superior energy storage efficiency through tailoring relaxor behavior and band energy gap in KNN-based ferroelectric ceramic capacitors

Abstract

With the increasing demand of high-power and pulsed power electronic devices, environmental-friendly potassium sodium niobate ((Na[Formula: see text]K[Formula: see text])NbO3, KNN) ceramic-based capacitors have attracted much attention in recent years owning to the boosted energy storage density ([Formula: see text]). Nevertheless, the dielectric loss also increases as the external electric field increases, which will generate much dissipated energy and raise the temperature of ceramic capacitors. Thus, an effective strategy is proposed to enhance the energy storage efficiency ([Formula: see text]) via tailoring relaxor behavior and bad gap energy in the ferroelectric 0.9(Na[Formula: see text]K[Formula: see text])-NbO3–0.1Bi(Zn[Formula: see text](Nb[Formula: see text]Ta[Formula: see text])[Formula: see text])O3 ceramics. On the one hand, the more diverse ions in the B-sites owing to introducing the Ta could further disturb the long-range ferroelectric polar order to form the short–range polar nanoregions (PNRs), resulting in the high [Formula: see text]. On the other hand, the introduction of Ta ions could boost the intrinsic band energy gap and thus improve the [Formula: see text]. As a result, high [Formula: see text] of 3.29 J/cm3 and ultrahigh [Formula: see text] of 90.1% at the high external electric field of 310 kV/cm are achieved in [Formula: see text] = 0.5 sample. These results reveal that the KNN-based ceramics are promising lead-free candidate for high-power electronic devices.

Keywords

• Lead-free dielectric ceramic capacitor
• KNN-based ceramics
• energy storage efficiency
• band gap energy
• relaxor behavior