Detection of foaling using a tail-attached device with a thermistor and tri-axial accelerometer in pregnant mares

Abstract

It is desirable to attend to the mare at the time of foaling in order to assist fetal delivery and prevent complications. The early detection of the onset of labor is an important issue for the equine industry. The purpose of this study was to examine the applicability of a sensor for foaling detection using the data of surface temperature (ST), roll angle (rotation about the y-axis) and y-axis (long axis of the tail) acceleration which were collected from a multimodal device attached to the ventral tail base of the mare. The data were collected every 3 minutes in 17 pregnant mares. Roll angle differences from the reference values and the mare’s posture (standing or recumbent) confirmed by video were compared and associated. Cohen’s kappa coefficient was 0.99 when the threshold was set as ± 0.3 radian in roll angle differences. This result clearly showed that the sensor data can accurately distinguish between standing and recumbent postures. The hourly sensor data with a lower ST (LST < 35.5°C), a recumbent posture determined by the roll angle, and tail-raising (TR, decline of 200 mg or more from the reference value in y-axis acceleration) was significantly higher during the last hour prepartum than 2−120 hours before parturition (P < 0.01). The accuracy of foaling detection within one hour was verified using the following three indicators: LST; lying down (LD, change from standing to recumbent posture); and TR. When LST, LD and TR were individually examined, even though all indicators showed that sensitivity was 100%, the precision was 13.1%, 8.1% and 2.8%, respectively. When the data were combined as LST+LD, LST+TR, LD+TR and LST+LD+TR, detection of foaling improved, with precisions of 100%, 32.1%, 56.7% and 100%, respectively. In conclusion, the tail-attached multimodal device examined in this present study is useful for detecting foaling.