On the Stability of Eccentrically Compressed Reinforced Concrete Elements with a Small Eccentricity, Taking into Account the Rheological Properties of Concrete

Abstract

In the practice of modern construction, flexible centrally and eccentrically compressed reinforced concrete elements are becoming more common. In this regard, the relevance of studying their work and the mechanism of bearing capacity exhaustion increases. There are two directions in determining the bearing capacity of these elements: calculation for stability and calculation for strength. The loss of stability in a number of cases, obviously, can cause the destruction of not only centrally, but also eccentrically compressed rods with small eccentricities, since under certain conditions they can practically turn out to be close in their work. The stability of these eccentrically compressed rods is calculated by multiple integration. Such a calculation is especially laborious for reinforced concrete elements. This article is devoted to the study of the stability of centrally and eccentrically compressed reinforced concrete rods with small eccentricities, taking into account the creep of concrete. An eccentrically compressed rod with a small eccentricity of length l is replaced by a centrally compressed rod of length l0 so that the bending arrow includes the eccentricity. The numerical values of the rheological coefficients are determined from the boundary values of the reduced stiffness, which varies along the length of the rod. Complicated integration is replaced by the solution of the differential equation of the bent axis of the rod in the form of a sinusoid half-wave.

Keywords

• reinforced concrete
• eccentric compression
• stability
• rigidity
• flexibility
• creep
• diagram