Optical Materials: X (May 2023)
Organic heterostructured scintillators with a high pulse shape discrimination capability
Abstract
Recently, we have developed a new type of the scintillation material, namely organic composite scintillators. It is a non-scintillating transparent gel composition (a polysiloxane elastomer) containing grains of organic single crystals. The grains are obtained after directional crystallization of the material by crushing a crystalline ingot under a layer of liquid nitrogen. This approach removes technological restrictions on the area of the entrance window of a scintillator, does not require the growth of structurally perfect single crystals and their subsequent mechanical treatment. In contrast to organic single crystals and liquids, these materials are not continuous media but heterostructured ones.The ability of single crystals and liquids to separate signals from radiations with different specific energy losses dE/dx is well known. Due to the peculiarities of the creation and recombination of triplet-excited (T) states in these objects is also well studied. Such information on heterostructured scintillation materials, for which the grain size can limit migration of T-states, is practically absent.We discuss the results of the investigation of the luminescence spectra upon excitation by light into the T-states absorption region and the relative light yield of composite scintillators containing p-terphenyl grains (both activated and non-activated) and trans-stilbene grains. We used the grain fractions from 0.04 to 1.0 mm. We obtained and studied both single-layer samples (the thickness of a sample practically corresponded to the grain size of the scintillation material) and samples of 5 mm thick. The research results showed that samples with grain fractions of less than 0.04, 0.06 and between 0.06 and 0.1 mm have low intensity of the delayed fluorescence and relative light output values. We obtained that to separate radiations with different dE/dx by the shape of the radioluminescence pulse it is advisable to use grain fractions larger than 0.1 mm. We also discuss the physical processes that can lead to such results.
