Effect of particle gradation of aluminum on the explosion field pressure and temperature of RDX-based explosives in vacuum and air atmosphere

Abstract

To optimize the energy output and improve the energy utilization efficiency of an aluminized explosive, an explosion device was developed and used to investigate the detonation pressure and temperature of R1 (Al6) aluminum powder and the aluminum powder particle gradation of R2 (Al6+Al13), R3 (Al6+Al24) and R4 (Al6+Al flake) in a confined space. By using gas chromatography, quantitative analysis and calculations were carried out to analyze the gaseous detonation products. Finally, the reaction ratios of the aluminum powder and the explosion reaction equations were calculated. The results show that in a confined space, the quasi-static pressures and equilibrium temperature of the aluminum powder in air are higher than in vacuum. In vacuum, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R3>R4>R2 and R3>R4>R1>R2, respectively. In air, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R2>R4>R3 and R1>R4>R2>R3, respectively. R4 (Al6+Al flake) and R3 (Al6+Al24) have relatively higher temperatures after detonation, which shows that the particle gradation method can enhance the reaction energy output of aluminum during the initial reaction stage of the explosion and increase the reaction ratio by 10.6% and 8.0%, respectively. In air, the reaction ratio of Al6 aluminum powder can reach as high as 78.16%, and the reaction ratio is slightly reduced after particle gradation. Finally, the reaction equations of the explosives in vacuum and in air were calculated by quantitative analysis of the explosion products, which provides a powerful basis for the study of RDX-based explosive reactions. Keywords: Particle gradation, Quasi-static pressure, Equilibrium temperature, Reaction ratio