A Method for Precise Tracking Control of Pneumatic Artificial-Muscle-Driven Exoskeletal Robot

Abstract

Exoskeletal robots are of critical importance in the domain of mechanical boosting. The pneumatic artificial muscle (PAM) is commonly used as a flexible actuator in exoskeletal robots designed for upper limbs due to its high power-to-weight ratio, conformability, and safety. This study establishes a new model based on the existing model to improve its control precision by implementing elastic and frictional forces and empirical coefficients, battling against the time-variant hysteresis that PAM’s output force exhibits. In the meantime, a BP neural network is employed in reverse modeling, followed by the adoption of the least-square-based particle swarm optimization algorithm in order to determine the optimized parameter values. PAM provides the Upper Limb Exoskeletal Robot with appropriate auxiliary power, which can be adjusted to accommodate variations in posture change during the lifting process. PAM is also capable of handling variable loads based on the principle of torque balance, constructing a control system according to the inverse dynamics of exoskeletal robots accompanied by an inverse model of PAM’s output force, and finally, rendering tracking control of the elbow angle during the auxiliary process possible. Finally, the tracking error results are calculated and shown; the maximum angular error in the tracking process is 0.0175 rad, MAE value is 0.0038 rad, RMSE value is 0.0048 rad, and IEAT value is 4.6426 rad. This control method is able to improve the precision of tracking control of the elbow angle of the upper limb–exoskeleton coupled system during the process of lifting goods.

Keywords

• pneumatic artificial muscle
• Upper Limb Exoskeleton
• variable load
• tracking control