Research on the Ignition Strategy of Diesel Direct Injection Combined with Jet Flame on the Combustion Character of Natural Gas in a Dual-Fuel Marine Engine

Abstract

In large-bore two-stroke diesel/nature gas dual-fuel marine engines, a certain quantity of diesel is injected into the cylinder to satisfy the full-power output engine rated power of the gas mixture. However, the ignition and flame propagation process based on the injection strategy of diesel direct injection combined with diesel jet flame on the ignition and combustion of natural gas is unclear, which directly affects the power and the thermal efficiency of engine and emissions. Therefore, this work numerically investigates the flame propagation characteristic under the strategy of the main and pilot diesel modes. The influence of the injection timing and proportion of diesel on combustion and emission performance are further analyzed. The results show that the influence of the injection timing of main diesel (MDIT) on the combustion process and emission performance is more obvious than that of the injection timing of pilot diesel (PDIT). The results indicate that the MDIT increased from −2°CA to −8°CA, the power increased by 316 kW, and the thermal efficiency improved by 1.5%. However, the CO2 emissions increased by 10.5 g/kWh, and the NOx emissions increased by 0.7 g/kWh. Additionally, an early PDIT is not conducive to the rapid organization of combustion, resulting in decreased engine power and thermal efficiency. Furthermore, it was found that the power improved by 50 kW and the thermal efficiency improved by 0.6%, with a decrease in the main diesel ratio (MDR) from 100% to 90%. Meanwhile, the CO2 emissions decreased by 4 g/kWh, although there was no obvious change in NOx emissions with the advance of MDR.

Keywords

• large-bore dual-fuel engine
• diesel injection strategy
• combustion performance
• emission reduction
• numerical simulation method