Effect of the Sizing Removal Methods of Fiber Surface on the Mechanical Performance of Basalt Fiber-Reinforced Concrete

Abstract

In this study, comprehensive analyses were used to evaluate the physical and chemical properties of basalt fibers, employing a variety of instruments. Additionally, heat treatment and solvent treatment methods were used to eliminate the sizing present on fiber surfaces. The heat treatment process involved determining the optimal temperature and duration required to remove the sizing from the basalt fibers. The appearance, chemical composition, and crystal structure of the original fibers were examined, including those subjected to heat treatment and those treated with solvents. These treated fibers were then incorporated into concrete to create basalt fiber-reinforced concrete (BFRC) specimens for mechanical tests, which assessed their compressive, flexural, and splitting tensile strengths. The results revealed that heat treatment at 300 °C for 180 min effectively removed the sizing on the basalt fibers, and the heat-treated basalt fibers exhibited uniform dispersion inside the BFRC specimens. In addition, solvent treatment primarily removed the soluble components of the sizing. The mechanical properties of specimens with sizing-removed basalt fibers were better than the specimens with original basalt fibers and the benchmark specimens. Crucially, the mechanical test results demonstrated that BFRC incorporating heat-treated basalt fibers exhibited a superior mechanical performance compared to BFRC incorporating original fibers or fibers subjected to the solvent treatment.

Keywords

• basalt fiber
• sizing
• heat treatment
• solvent treatment
• mechanical test