Sensors (Apr 2022)

Doppler Shift Tolerance of Typical Pseudorandom Binary Sequences in PMCW Radar

  • Lucas Giroto de Oliveira,
  • Theresa Antes,
  • Benjamin Nuss,
  • Elizabeth Bekker,
  • Akanksha Bhutani,
  • Axel Diewald,
  • Mohamad Basim Alabd,
  • Yueheng Li,
  • Mario Pauli,
  • Thomas Zwick

DOI
https://doi.org/10.3390/s22093212
Journal volume & issue
Vol. 22, no. 9
p. 3212

Abstract

Read online

In the context of all-digital radar systems, phase-modulated continuous wave (PMCW) based on pseudorandom binary sequences (PRBSs) appears to be a prominent candidate modulation scheme for applications such as autonomous driving. Among the reasons for its candidacy are its simplified transmitter architecture and lower linearity requirements (e.g., compared to orthogonal-frequency division multiplexing radars), as well as its high velocity unambiguity and multiple-input multiple-output operation capability, all of which are characteristic of digital radars. For appropriate operation of a PMCW radar, choosing a PRBS whose periodic autocorrelation function (PACF) has low sidelobes and high robustness to Doppler shifts is paramount. In this sense, this article performs an analysis of Doppler shift tolerance of the PACFs of typically adopted PRBSs in PMCW radar systems supported by simulation and measurement results. To accurately measure the Doppler-shift-induced degradation of PACFs, peak power loss ratio (PPLR), peak sidelobe level ratio (PSLR), and integrated-sidelobe level ratio (ISLR) were used as metrics. Furthermore, to account for effects on targets whose ranges are not multiples of the range resolution, oversampled PACFs are analyzed.

Keywords