Internal Hydroforming of Large Stainless-Steel Eggshells from Stepped Preforms

Abstract

The internal hydroforming of large stainless-steel eggshells from a stepped preform is investigated in this paper. The nominal major and minor axes of the eggshell were 1537 and 1070 mm, respectively. The stepped preform was fabricated from thin-walled (1.9 mm thick) stainless-steel sheets and comprised twelve conical segments inscribed inside the target eggshell. The preform was then hydroformed, and its wall thickness and shape were measured. The yield load distribution and material hardening of the hydroforming process were investigated analytically. Nonlinear finite-element analyses were employed to further investigate hydroforming behaviors and the effect of weld lines on hydroforming. The experimental, numerical, and analytical results were consistent. The results confirm that, during the hydroforming process, considerable springback occurs for large eggshells, which greatly affects forming precision. However, this effect can be reduced by accounting for the strengthening effect of weld lines.

Keywords

• eggshell
• stepped preform
• hydroforming
• analytical analysis