Frontiers in Bioengineering and Biotechnology (Dec 2021)

A 3-D Finite-Element Minipig Model to Assess Brain Biomechanical Responses to Blast Exposure

  • Aravind Sundaramurthy,
  • Aravind Sundaramurthy,
  • Vivek Bhaskar Kote,
  • Vivek Bhaskar Kote,
  • Noah Pearson,
  • Gregory M. Boiczyk,
  • Elizabeth M. McNeil,
  • Allison J. Nelson,
  • Allison J. Nelson,
  • Dhananjay Radhakrishnan Subramaniam,
  • Dhananjay Radhakrishnan Subramaniam,
  • Jose E. Rubio,
  • Jose E. Rubio,
  • Kenneth Monson,
  • Kenneth Monson,
  • Warren N. Hardy,
  • Pamela J. VandeVord,
  • Pamela J. VandeVord,
  • Ginu Unnikrishnan,
  • Ginu Unnikrishnan,
  • Jaques Reifman

DOI
https://doi.org/10.3389/fbioe.2021.757755
Journal volume & issue
Vol. 9

Abstract

Read online

Despite years of research, it is still unknown whether the interaction of explosion-induced blast waves with the head causes injury to the human brain. One way to fill this gap is to use animal models to establish “scaling laws” that project observed brain injuries in animals to humans. This requires laboratory experiments and high-fidelity mathematical models of the animal head to establish correlates between experimentally observed blast-induced brain injuries and model-predicted biomechanical responses. To this end, we performed laboratory experiments on Göttingen minipigs to develop and validate a three-dimensional (3-D) high-fidelity finite-element (FE) model of the minipig head. First, we performed laboratory experiments on Göttingen minipigs to obtain the geometry of the cerebral vasculature network and to characterize brain-tissue and vasculature material properties in response to high strain rates typical of blast exposures. Next, we used the detailed cerebral vasculature information and species-specific brain tissue and vasculature material properties to develop the 3-D high-fidelity FE model of the minipig head. Then, to validate the model predictions, we performed laboratory shock-tube experiments, where we exposed Göttingen minipigs to a blast overpressure of 210 kPa in a laboratory shock tube and compared brain pressures at two locations. We observed a good agreement between the model-predicted pressures and the experimental measurements, with differences in maximum pressure of less than 6%. Finally, to evaluate the influence of the cerebral vascular network on the biomechanical predictions, we performed simulations where we compared results of FE models with and without the vasculature. As expected, incorporation of the vasculature decreased brain strain but did not affect the predictions of brain pressure. However, we observed that inclusion of the cerebral vasculature in the model changed the strain distribution by as much as 100% in regions near the interface between the vasculature and the brain tissue, suggesting that the vasculature does not merely decrease the strain but causes drastic redistributions. This work will help establish correlates between observed brain injuries and predicted biomechanical responses in minipigs and facilitate the creation of scaling laws to infer potential injuries in the human brain due to exposure to blast waves.

Keywords