Materials (Aug 2024)

Direct Ink Writing of SiCN/RuO<sub>2</sub>/TiB<sub>2</sub> Composite Ceramic Ink for High-Temperature Thin-Film Sensors

  • Yusen Wang,
  • Lida Xu,
  • Xiong Zhou,
  • Fuxin Zhao,
  • Jun Liu,
  • Siqi Wang,
  • Daoheng Sun,
  • Qinnan Chen

DOI
https://doi.org/10.3390/ma17153792
Journal volume & issue
Vol. 17, no. 15
p. 3792

Abstract

Read online

Direct ink writing (DIW) of high-temperature thin-film sensors holds significant potential for monitoring extreme environments. However, existing high-temperature inks face a trade-off between cost and performance. This study proposes a SiCN/RuO2/TiB2 composite ceramic ink. The added TiB2, after annealing in a high-temperature atmospheric environment, forms B2O3 glass, which synergizes with the SiO2 glass phase formed from the SiCN precursor to effectively encapsulate RuO2 particles. This enhances the film’s density and adhesion to the substrate, preventing RuO2 volatilization at high temperatures. Additionally, the high conductivity of TiB2 improves the film’s overall conductivity. Test results indicate that the SiCN/RuO2/TiB2 film exhibits high linearity from room temperature to 900 °C, high stability (resistance drift rate of 0.1%/h at 800 °C), and high conductivity (4410 S/m). As a proof of concept, temperature sensors and a heat flux sensor were successfully fabricated on a metallic hemispherical surface. Performance tests in extreme environments using high-power lasers and flame guns verified that the conformal thin-film sensor can accurately measure spherical temperature and heat flux, with a heat flux sensor response time of 53 ms. In conclusion, the SiCN/RuO2/TiB2 composite ceramic ink developed in this study offers a high-performance and cost-effective solution for high-temperature conformal thin-film sensors in extreme environments.

Keywords