Polymer-Coated Nanoparticles and Pickering Emulsions as Agents for Enhanced Oil Recovery: Basic Studies Using a Porous Medium Model

Abstract

Globally the overall oil recovery factors for primary and secondary recovery range from 35% to 45%, and a tertiary recovery method that can enhance the recovery factor by 10–30% could contribute to the energy supply. The use of nanoparticles in enhanced oil recovery (EOR) processes comprises an emerging and well-promising approach. Polymer-coated nanoparticles (PNPs) were synthesized through the free radical polymerization (FRP) of the monomers 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPSA) and dodecyl methacrylate (DMA) on the surface of acrylic-modified spherical silica nanoparticles. The obtained PNPs were characterized using Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR) and thermogravimetric analysis (TGA). Dispersions of PNPs were prepared in salt (NaCl, CaCl2) aqueous solutions, the static oil/water interfacial tension were measured using the Du Nouy ring method, and changes caused based on the oil/water contact angle were recorded optically. The PNP dispersions were used to stabilize and characterize shear-thinning oil-in-water Pickering emulsions. The capacity of the PNP dispersions and Pickering emulsions to mobilize the trapped ganglia of viscous paraffin oil, which remained after successive tests of drainage and primary imbibition, was tested with visualization experiments of the secondary imbibition in a transparent glass-etched pore network. The synthesized SiO2-P(AMPSA-co-DMA) nanoparticles were stable even at high temperatures (~200–250 °C) and displayed excellent stability in aqueous dispersions at high ionic strengths with the presence of divalent cations, and their dispersions generated stable oil-in-water Pickering emulsions with a shear-thinning viscosity. The oil-recovery efficiency is maximized when the most viscous Pickering emulsion is selected, but if energy cost factors are also taken into account, then the less viscous Pickering emulsion is preferable.

Keywords

• AMPSA
• polymer-coated nanoparticles
• enhanced oil recovery
• Pickering emulsion
• immiscible displacement