Effectiveness of Fiber Optic Distributed Acoustic Sensing (DAS) in Vertical Seismic Profiling (VSP) Field Survey

Abstract

The evolution of fiber optic technology in the past few decades has led to significant advancements in various fields, including high-speed and long-distance communication, big data transport, optical imaging, and sensing. However, relatively few studies have examined the use of fiber optic sensors (FOSs) as point and distributed sensors in geophysics. Distributed Acoustic Sensing (DAS) is a widely used method for subsurface imaging and monitoring in wells, specifically in Vertical Seismic Profiling (VSP) surveys. This method allows for detailed analysis of subsurface structures and properties of reservoirs. Four different strategies for deploying FOS cables in DAS VSP are evaluated and compared: cementing behind casing, cable behind inflatable liner, strapping to production tubing, and wireline deployment. Cementing the fiber behind casing is considered the most effective method for coupling with the formation. However, the other methods also have their own advantages and limitations. The fiber cable behind inflatable liner, for example, allows for accessibility to the fiber without affecting the acoustic signal, while strapping the fiber to production tubing can still record DAS signals; tubing noise and signal attenuation from the annular fluid, however, can make it difficult to differentiate from the seismic signal. Nonetheless, this method has the benefit of being simpler to deploy and replace in case of failure. Wireline deployment can pick up some acoustic signals in regions where the cable touches the well wall, but in vertical sections where the cable is not in contact with the wall, the signal is attenuated. Results from pilot tests in a field in Canada are discussed and evaluated, and suggestions for improving the VSP signal are provided.

Keywords

• Distributed Acoustic Sensing
• Vertical Seismic Profiling
• DAS deployment