Influence of MACl on the Crystallization Kinetics of Perovskite via a Two-Step Method

Abstract

The addition of methylammonium chloride (MACl) significantly improves the performance and stability of perovskite fabricated by two-step processes. However, its role in crystallization dynamics has not been thoroughly studied. In this work, a comparison study is carried out using different additions of MACl to investigate the impact of the perovskite crystallization dynamics. In situ grazing incidence wide-angle X-ray scattering (GIWAXS) observations during the annealing process of perovskite revealed that the amount of MACl significantly influences the crystallinity and orientation of the perovskite. Increasing the MACl addition enhances the crystallinity of the perovskite in the wet film‘s intermediate phase and strengthens the out-of-plane orientation of the FAPbI3 perovskite α-phase (001) planes during annealing. Moreover, it was found that both excessive and insufficient amounts of MACl introduce defects into the perovskite, which are detrimental to device performance. In contrast, an optimal ratio of MACl-9 mg leads to the formation of uniform and large-grained FAPbI3 perovskite films, with the longest carrier lifetimes (163.7 ns) compared to MACl-5 mg (68.4 ns) and MACl- 13 mg (120.1 ns). As a result, the fabricated MACl-9 mg-based solar cell achieved the highest efficiency (22.63%), which is higher than those of MACl-5 mg (21.47%) and MACl-13 mg (20.07%).

Keywords

• perovskite solar cells
• two-step preparation
• GIWAXS
• crystallization kinetics