Surface modification of carbon nanotubes and their nanocomposites for fuel cell applications: A review

Abstract

Carbon nanotubes (CNTs) have drawn great attention as potential materials for energy conversion and storage systems such as batteries, supercapacitors, and fuel cells. Among these energy conversion and storage systems, the fuel cells had stood out owing to their high-power density, energy conversion efficiency and zero greenhouse gasses emission. In fuel cells, CNTs have been widely studied as catalyst support, bipolar plates and electrode material due to their outstanding mechanical strength, chemical stability, electrical and thermal conductivity, and high specific surface area. The use of CNT has been shown to enhance the electrocatalytic performance of the catalyst, corrosion resistivity, improve the transmission performance of the fuel cell and reduce the cost of fuel cells. The use of CNTs in fuel cells has drastically reduced the use of noble metals. However, the major drawback to the utilization of pristine CNTs in fuel cells are; poor dispersion, agglomeration, and insolubility of CNTs in most solvents. Surface engineering of CNTs and CNT nanocomposites has proven to remarkably remedy these challenges and significantly enhanced the electrochemical performance of fuel cells. This review discusses the different methods of surface modification of CNTs and their nanocomposite utilized in fuel cell applications. The effect of CNTs in improving the performance of fuel cell catalyst, membrane electrode assembly and bipolar plates of fuel cells. The interaction between the CNTs catalyst support and the catalyst is also reviewed. Lastly, the authors outlined the challenges and recommendations for future study of surface functionalized CNTs composite for fuel cell application.

Keywords

• carbon nanotubes
• functionalization
• fuel cells
• electrocatalyst
• nanocomposite