The Assessment of PM2.5 and PM10 Immission in Atmospheric Air in a Climate Chamber during Tests of an Electric Car on a Chassis Dynamometer

Abstract

Electric cars, like internal combustion vehicles, emit particulate pollution from non-exhaust systems, i.e., tires and brakes, which is included in the Euro 7 emission standard planned for implementation. Tests conducted on chassis dynamometers are accompanied by particulate emissions from non-exhaust systems, which are introduced into the ambient air on the test bench. Particulate emissions tests from non-engine systems on chassis dynamometers are mainly aimed at measuring the mass or number of particulates from tires and brakes. In contrast, little attention is paid to the immission of particulate matter from tires and brakes on the dynamometer during tests, which in the case of electric cars include, for example, measurements of energy consumption or range. Therefore, in order to draw attention to the problem of these emissions, the authors carried out measurements of PM2.5 and PM10 immissions into the air in the climatic chamber during tests of an electric car on a chassis dynamometer. The car tests were carried out in accordance with the WLTC (Worldwide harmonized Light duty Test Cycle) and at constant speed. Based on the test results, a model was proposed for the immission of particulate matter in laboratory air from tire and brake abrasion, taking traffic parameters into account. The results and the developed model show that air quality, in terms of particulate content, deteriorates significantly during testing.

Keywords

• non-exhaust particle emissions
• PEV testing
• chassis dyno
• air quality