Nanofluidic Study of Multiscale Phase Transitions and Wax Precipitation in Shale Oil Reservoirs

Abstract

During hydraulic fracturing of waxy shale oil reservoirs, the presence of fracturing fluid can influence the phase behavior of the fluid within the reservoir, and heat exchange between the fluids causes wax precipitation that impacts reservoir development. To investigate multiscale fluid phase transition and microscale flow impacted by fracturing fluid injection, this study conducted no-water phase behavior experiments, water injection wax precipitation experiments, and water-condition phase behavior experiments using a nanofluidic chip model. The results show that in the no-water phase experiment, the gasification occurred first in the large cracks, while the matrix throat was the last, and the bubble point pressure difference between the two was 12.1 MPa. The wax precipitation phenomena during fracturing fluid injection can be divided into granular wax in cracks, flake wax in cracks, and wax precipitation in the matrix throat, and the wax mainly accumulated in the microcracks and remained in the form of particles. Compared with the no-water conditions, the large cracks and matrix throat bubble point in the water conditions decreased by 6.1 MPa and 3.5 MPa, respectively, and the presence of the water phase reduced the material occupancy ratio at each pore scale. For the smallest matrix throat, the final gas occupancy ratio under the water conditions decreased from 32% to 24% in the experiment without water. This study provides valuable insight into reservoir fracture modification and guidance for the efficient development of similar reservoirs.

Keywords

• shale oil reservoir
• hydraulic fracturing
• nanofluidic
• phase behavior experiment
• wax precipitation