Izvestiâ Vysših Učebnyh Zavedenij i Ènergetičeskih ob Edinennij SNG. Ènergetika (Apr 2022)
Energy-and-Technology Installation Based on a Rolling Mill Heating Furnace with the Option of Hydrogen Production
Abstract
The aim of the study was to evaluate the efficiency of an energy-and-technology unit based on a continuous furnace of a rolling mill with an option for hydrogen production. A brief analysis of hydrogen production technologies and the prospects of their application in metallurgy are presented. It has been determined that as for enterprises with the potential of thermal waste, the use of thermochemical technologies is promising for the production of hydrogen. The main aspects and features of thermochemical methods of hydrogen production are shown from the standpoint of choosing the number of stages of chemical reactions implementation and determining the thermodynamic conditions for their conduct. The conditions for the implementation of the copper-chlorine Cu–Cl thermochemical cycle were investigated, and a rational variant of its implementation has been determined, taking into account the use of thermal waste (secondary energy resources) of the heating furnaces of the rolling mill. The application of the evolutionary method made it possible, on the basis of the technological scheme (which had been previously developed and investigated, and consisted of an energy-and-technological installation as a part of a rolling mill of a heating furnace and a utilization gas turbine with external heat supply that maintains the regenerative component of heating the air oxidizer), to synthesize a scheme of an energy-and-technological installation with the inclusion of a technological unit implementing a hybrid thermochemical copper-chlorine Cu–Cl cycle for separating water into hydrogen and oxygen using thermal secondary energy resources and electricity generated by a utilization gas turbine installation. Mathematical model of the macro level has been developed. The conducted numerical test experiments have shown the high energy prospects of the developed energy-and-technology installation, the fuel utilization rate of which is in the range of 75–90 %. The coefficient of chemical regeneration of fuel energy for the test mode was 11.3 %. As a result of numerical research, the prospects of developments under consideration in terms of the development of hydrogen production technologies with the use of thermochemical cycles and the high-temperature thermal secondary resources have been proved.
Keywords
