Fast Synchronization Method of Comb-Actuated MEMS Mirror Pair for LiDAR Application

Abstract

MEMS-based LiDAR (micro-electro–mechanical system based light detection and ranging), with a low cost and small volume, becomes a promising solution for the two-dimensional (2D) and three-dimensional (3D) optical imaging. A semi-coaxial MEMS LiDAR design, based on a synchronous MEMS mirror pair, was proposed in our early study. In this paper, we specifically reveal the synchronization method of the comb-actuated MEMS mirror pair, including the frequency, amplitude, and phase synchronization. The frequency sweeping and phase adjustment are simultaneously implemented to accelerate the MEMS mirror synchronization process. The experiment is set up and the entire synchronization process is completed within 5 s. Eventually, a one-beam MEMS LiDAR system with the synchronous MEMS mirror pair is set up and a LiDAR with a field of view (FOV) of 60°, angular resolution of 0.2°, and frame rate of 360 Hz is obtained. The experimental results verify the feasibility of the MEMS mirror synchronization method and show a promising potential application prospect for the MEMS LiDAR system.

Keywords

• MEMS LiDAR
• MEMS mirror pair
• synchronization method