Инженерные технологии и системы (Jun 2024)

Computer Simulation of a Digital System of Automatic Lighting Control

  • Evgeniy A. Shabaev,
  • Mikhail M. Romanovets

DOI
https://doi.org/10.15507/2658-4123.034.202402.295-317
Journal volume & issue
Vol. 34, no. 2
pp. 295 – 317

Abstract

Read online

Introduction. In the poultry industry, the use of local LED lighting systems with changeable light and correlated color temperature of the luminaire optical radiation during the photoperiod is promising. To maintain light intensity accurately at a specified level, the use of an automatic control system (ACS) of lighting is required. Aim of the Study. The study at aimed at determining the parameters for the PI controller of the digital ACS of lighting in all-age cages, providing the required quality indicators of the regulatory process. Materials and Methods. For the study there were used the elements of mathematical statistics, experimental research design theory, correlation and regression analysis, automatic control theory and computer simulation. Real experiments were carried out on a laboratory sample of a digital dynamic local lighting system. Computer simulation was performed in the SimInTech program. Results. A computer model for a digital ACS of lighting has been developed. The tunings of the PI controller were calculated using the CHR, VTI, and Kopelovich methods. A comparative estimation of the control process quality was carried out using graphs of transient processes obtained by computer simulation. The reliability of the results of computer simulation of ACS lighting has been confirmed experimentally. Discussion and Conclusion. High regulator performance indicators for the digital ACS of lighting were ensured by a PI controller with kP = 14.027∙10−3 and TI = 145.72 ms calculated using the Kopelovitch method. A comparative assessment of transient processes in a real ACS and in a computer model of this system allows concluding that the developed model is highly accurate and the choice of simulation parameters in the SimInTech program is correct. It has been experimentally established that the required quality of the control process of ACS is ensured for a wide range of specified lighting: from 1 to 25 lux.

Keywords